Plastic hangers can have a variety of colors, but the effect to be made some difference, the color is not straight. Plastic hangers discoloration caused by many reasons, the following is MeiFeng factory to sort out some problem.
1. Mold. Mold of the exhaust system is bad, too much lubricant, etc., are likely to directly affect the final color plastic hangers and shaping.
2. Process problems. Each hanger factory production technology have high and low, this depends on technology and capabilities of its manufacturers. Process mainly include the screw rotation speed is high, the barrel temperature, injection pressure, injection so fast and so on plastic hangers are likely to cause discoloration.
3. The problem of injection molding machine equipment. Most of plastic hanger is done through the plastic injection machine, if the device has a problem, how to make a qualified plastic hangers. Equipment problems mainly include cleaning, temperature control problems and barrel problems, such as equipment not clean, the heating system error, barrel with other foreign material, etc.
3. Raw material, it is the most primary problem. The discoloration of raw materials are plastic hangers, including contaminated material, colorants, additives and so on.
In general, affect the plastic hanger color is related to every aspect, from the raw material to the device, then all should strictly control the production process, may be because a small details and affect the quality of the plastic hanger.
From:www.factorymf.com
No.534 Beiqing East Road, Beifeng Community, Beifeng Subdistrict, Fengze District
IPv6 network supported
